Abstract
To incorporate sufficient pumping power, a large-scale Yb-doped aluminophosphosilicate (Al2O3 -P2O5-SiO2, APS) fiber with 30- μ m core and 900- μ m inner clad in diameter, i.e., a 30/900 Yb-APS fiber, was theoretically designed and experimentally fabricated by using modified chemical vapor deposition system combining with chelate precursor doping technique. Analyzed by an electron probe microanalyzer, the dopant concentration of Yb2O3, Al2O 3, and P2O5 was estimated to be 0.14 mol%, 1.1 mol%, and 1.4 mol%, respectively. Based on an all-fiberized master oscillator power-amplifier laser setup directly forward pumped by commercial 976-nm laser diodes, 6.85-kW laser output at 1079.79 nm was achieved with an optical-to-optical efficiency of 67.1%, and the beam factor of $M^{2}$ was 2.38. The results indicate that large-scale Yb-APS fiber is quite competitive for high-power fiber laser development.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
