Abstract
An advanced technology using a multiple moving X-ray mask deep X-ray lithography (M3DXL) to realize various microstructures with inclined or free shape side wall, namely 3-dimensional microstructures, was proposed. The side wall shape of a PMMA microstructure fabricated by deep X-ray lithography has bean controlled by moving X-ray masks in parallel with the PMMA substrate during X-ray exposure. In order to demonstrate the feasibility of this M3DXL technology, various microstructures were successfully fabricated; (1) conical shape and truncated conical shape microstructures with height of 100-300μm and a diameter of 0-310μm and (2) grooves with saw shape cross section with depth of about 30μm and width of 100-150μm.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.