Abstract
The design of an additively manufactured circular waveguide 3-dB hybrid directional coupler is proposed and demonstrated. Asymmetric corner radius perturbations at the in-plane orthogonal junction of the four waveguides along with curvilinear inductive posts designed to interact with the TE <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">11</sub> mode of the circular waveguide are used to facilitate directivity and isolation. Capacitive waveguide perturbations at each of the four ports provide impedance matching. The proposed design is engineered to operate within V-band from 57 to 64 GHz and provide both 10-dB isolation and return loss and a 90° phase difference between the direct and coupled ports. A commercially available stereolithography (SLA) printer is used to fabricate the hybrid coupler as well as the rectangular-to-circular tapered mode transducers and the thru, reflect, line (TRL) calibration components required for experiments. The printed couplers are metallized using an electroless silver plating process by a closed-loop bidirectional multiport pump-driven fluidic system. Results from the experiment and the simulation are provided.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
