3-D FE modelling of residual stress distribution in 3003 aluminium alloy overlapped joints by ARM laser with beam oscillations

Abstract

Adjustable Ring Mode (ARM) laser technology combined with Beam Oscillation optics module was introduced to effectively enhance weld quality in joining aluminium alloys. This study developed a three-dimensional (3-D) thermo-mechanical finite element (FE) model to analyze the distribution of thermally induced residual stresses in laser-welded 3003 aluminium alloy. The accuracy of model was validated through comparisons with experimental weld cross-sections and further reinforced by X-ray diffraction residual stress measurements. The transient temperature field and stress distribution during the welding process were investigated using the verified model. Additionally, the hardness and microstructure of the welded samples were examined through micro-hardness tests and scanning electron microscopy. Results showed that welding with beam oscillation resulted in less penetration but higher hardness and finer columnar grain size in the fusion zone. Additionally, the influence of varying standoff distances between two sequential weld beads on residual stress distribution was investigated. Numerical findings revealed that higher residual stress concentrations were located at the weld seam and dominated by tensile longitudinal residual stress and compressive transverse residual stress. As the distance between weld beads increased, transverse and equivalent residual stresses decreased, while longitudinal residual stress away from the bead increased.