Abstract

SUMMARYThe Pollino range is a region of slow deformation where earthquakes generally nucleate on low-angle normal faults. Recent studies have mapped fault structures and identified fluid-related dynamics responsible for historical and recent seismicity in the area. Here, we apply the coda-normalization method at multiple frequencies and scales to image the 3-D P-wave attenuation (QP) properties of its slowly deforming fault network. The wide-scale average attenuation properties of the Pollino range are typical for a stable continental block, with a dependence of QP on frequency of $Q_\mathrm{ P}^{-1}=(0.0011\pm 0.0008) f^{(0.36\pm 0.32)}$. Using only waveforms comprised in the area of seismic swarms, the dependence of attenuation on frequency increases [$Q_\mathrm{ P}^{-1}=(0.0373\pm 0.0011) f^{(-0.59\pm 0.01)}$], as expected when targeting seismically active faults. A shallow very-low-attenuation anomaly (max depth of 4–5 km) caps the seismicity recorded within the western cluster 1 of the Pollino seismic sequence (2012, maximum magnitude Mw = 5.1). High-attenuation volumes below this anomaly are likely related to fluid storage and comprise the western and northern portions of cluster 1 and the Mercure basin. These anomalies are constrained to the NW by a sharp low-attenuation interface, corresponding to the transition towards the eastern unit of the Apennine Platform under the Lauria mountains. The low-seismicity volume between cluster 1 and cluster 2 (maximum magnitude Mw = 4.3, east of the primary) shows diffuse low-to-average attenuation features. There is no clear indication of fluid-filled pathways between the two clusters resolvable at our resolution. In this volume, the attenuation values are anyway lower than in recognized low-attenuation blocks, like the Lauria Mountain and Pollino Range. As the volume develops in a region marked at surface by small-scale cross-faulting, it suggests no actual barrier between clusters, more likely a system of small locked fault patches that can break in the future. Our model loses resolution at depth, but it can still resolve a 5-to-15-km-deep high-attenuation anomaly that underlies the Castrovillari basin. This anomaly is an ideal deep source for the SE-to-NW migration of historical seismicity. Our novel deep structural maps support the hypothesis that the Pollino sequence has been caused by a mechanism of deep and lateral fluid-induced migration.

Highlights

  • Seismic waves lose energy during propagation in heterogeneous Earth media

  • Q is suited to image fluid storage and propagation at subduction (Schurr et al 2003) and, especially, fault scale (Chiarabba et al 2009)

  • The lowattenuation volume directly above the area of the cluster 1 events correlates with the presence of impermeable formations possibly enhanced by changes in fault mechanisms

Read more

Summary

Introduction

Seismic waves lose energy during propagation in heterogeneous Earth media. They lose amplitude in space and time due to seismic attenuation, whose description is central when modelling seismic wave propagation both at the laboratory and field scales (Muller et al 2010; Cormier 2011; Sato et al 2012). The total quality factor (Q) measures the anelastic attenuation of coherent waves. It is defined as the fractional energy lost per cycle and controls the decay of the energy density spectrum with lapse time from the origin time of the earthquake (Cormier 2011). Q is suited to image fluid storage and propagation at subduction (Schurr et al 2003) and, especially, fault scale (Chiarabba et al 2009)

Methods
Discussion
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call