Abstract
Prototype of metal electrodes implanted PDMS microchannel to control the 3-D electric field or precise temperature and new fabrication method were proposed. Our tentative goal is to fabricate a PDMS microchannel which has vertical and horizontal electrodes pairs. Accurate angles of 90 degree between the each electrode are obtained. CYTOP back plates under the metal electrodes were employed due to the residual stress. The CYTOP was worked as the protection layer from photolithography process containing organic solvent. The proposed micro channel consists of the single electrode implanted PDMS substrate and three electrodes of upper and both side implanted cover PDMS structure. We develop novel assembly method starting with three electrodes installed planar PDMS in order to form the 3-D microstructures.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
