2D/3D hierarchical porous structure of mNPC/SMOH@C to construct an electrochemical sensor for the simultaneous determination of p-acetylaminophenol and p-aminophenol

Abstract

BackgroundAs persistent organic pollutants (POPs), the accumulation of p-acetylaminophenol (PAT) and p-aminophenol (PAP) in water can seriously damage the health of plants and animals, ultimately leading to threats to human health and safety. Electrochemical sensors have the advantages of being fast, inexpensive, and accurate compared to the complex, expensive, and cumbersome conventional analytical methods. In this study, we designed and synthesized composites with two-dimensional/three-dimensional (2D/3D) porous structures to construct an efficient electrochemical platform for the simultaneous detection of PAT and PAP. ResultsIn this work, a novel 3D foamy birnessite Na0.55Mn2O4·1.5H2O@C (SMOH@C) was synthesized, which was composited with 2D ordered mesoporous nanosheets (mNPC) to construct electrochemical sensors detecting PAT and PAP simultaneously. The prepared 2D/3D porous structure of mNPC/SMOH@C increased the exposure of active sites due to its large specific surface area. The introduction of a 3D carbon skeleton altered the charge transfer rate of SMOH@C, and the rich pore structure and oxygen-rich vacancies created favorable conditions for the diffusion and adsorption of PAP and PAT, which enabled the sensitive detection of PAT and PAP. The constructed mNPC/SMOH@C electrochemical sensor could simultaneously detect PAT (1 × 10−7 - 1 × 10−4 M) and PAP (5 × 10−8 - 1 × 10−4 M) with detection limits of 20.4 nM and 30.1 nM, respectively. The sensor has good repeatability (RSD <4 %) and reproducibility (RSD <4 %), and satisfactory recoveries (96.7–102.8 %) were obtained in the analysis of natural water samples. SignificanceIn this paper, for the first time, we present the synthesis of 3D foam birnessite and its composite with mNPC for the electrochemical simultaneous detection of PAT and PAP. Our proposed strategy for fabricating 2D/3D porous composites lays the foundation for the design and synthesis of other porous materials. In addition, this study provides new ideas for developing efficient and practical electrochemical sensors for detecting pollutants in aquatic environments.