Abstract
An accurate method, based on many hundred assays, is given for the determination of sulphur in samples of approximately 0·2 g of wool. It gives highly repeatable results, as evidenced by the small range of 3·21—3·32% sulphur with a standard error of 0·003%, for 61 determinations on a Merino top and the quantitative recovery of wool sulphur in the presence of potassium sulphate. The analytical procedure involves the wet oxidation of the sulphur to sulphuric acid by a nitric–perchloric acid mixture, and the subsequent precipitation and weighing of barium sulphate. The use of potassium dichromate as a catalyst for the oxidation, and as an indicator for its end point is discussed. The rate of the oxidation and the quantity of nitric acid required are critical as slow oxidations produce low results. Excess perchloric acid or potassium dichromate interferes with the precipitation of barium sulphate through solubility and co-precipitation effects. The methods for addition of barium chloride, aggregation and filt...
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.