Abstract
A 3 leg moving robot which has legs constructed by injection molding pantograph mechanism from polypropylene is herein suggested, and the velocity characteristics are measured in this paper. The injection molding pantograph mechanism has some natural frequencies in various directions with reference to the output point when an input wave is applied at an input point. Therefore, if the injection molding pantograph mechanisms are applied as legs, the robot employing pantograph mechanisms can move in various directions by actuating only one leg. A manufactured 3 leg vibration moving robot could move forward at 38mm/s, backward at 54mm/s and spin at 0.23rad/s by actuating one leg. By shifting the phase between each leg and the amplitude of the legs, the vibration propelled robot was able to accomplish a high speed of 167mm/s.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: The Proceedings of the Symposium on Motion and Power Transmission
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.