Abstract
The 1/f additive phase noise of one-port injection-locked oscillators is experimentally characterized and analyzed using a simple analytic model based on the generalized 1/f Kurokawa theory. To experimentally verify the prediction of the simple analytic model proposed, two negative-conductance transmission line pHEMT oscillators operating at 2.4828 GHz and 2.485 GHz were designed and fabricated. A new configuration for integrating an additive phase noise measurement system with a large signal network analyzer (LSNA) is introduced to jointly acquire both the noise and RF waveforms of the one-port injection-locked oscillator. The Kurokawa derivatives needed for the analytic expression were experimentally obtained using the LSNA measurements and optimized to accurately model the corner frequency. A good agreement between the predicted and experimental results was obtained for both the injection-locked and free-running oscillators. In contrast to phase noise measurements of the free-running oscillator, which can only characterize the oscillator-upconverted 1/f3 noise, the additive phase noise characterization of the injection-locked oscillator is shown to provide the means to directly observe and characterize the input-referred intrinsic 1/f noise source of the oscillator negative resistance.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.