Abstract

PurposeThe goal of this study was to find the optimal combination of collimator, photopeak and scatter correction for 177Lutetium (177Lu) SPECT/CT imaging.MethodsThree experiments [sphere‐to‐background ratios (SBR) 50:1, 10:1, and 2:1] were performed with the NEMA Image Quality phantom filled with 177Lu‐trichloride. SPECT/CT acquisitions were performed with the medium‐energy low‐penetration (MELP) collimator and 99mTc/Krypton collimator. For each acquisition six reconstructions, all with attenuation correction (AC), were made: the 113‐keV photopeak only, the 208‐keV photopeak only and both photopeaks combined, each with or without scatter correction (SC). Image quality was assessed using contrast‐to‐noise ratios (CNR), quantification accuracy by means of recovery coefficients (RCs) and the spatial resolution using line profiles.ResultsWith SBR 50:1 and 10:1, both collimators met the Rose criterion (CNR > 5), whereas the MELP collimator showed a higher CNR for the 2:1 ratio. The RCmean was higher with the MELP collimator, most explicit after the 208‐keV AC/SC reconstruction for all acquisitions. The line profiles showed a better spatial resolution for the MELP collimator and the 208‐keV AC/SC reconstructions.Conclusion 177Lu SPECT/CT image quality and quantification was most optimal when acquired with the MELP collimator and reconstructed using the 208‐keV photopeak, with AC and SC.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.