Abstract
We review the design, fabrication, and characterization of 1.55-/spl mu/m lattice-matched vertical-cavity surface-emitting lasers, operating continuous wave up to 88/spl deg/C. For one embodiment, the threshold current is 800 /spl mu/A, the differential quantum efficiency is 23%, and the maximum output power is more than 1 mW at 20/spl deg/C and 110 /spl mu/W at 80/spl deg/C. The basic structure consists of AlAsSb-AlGaAsSb mirrors, which provide both high reflectivity and an InP-lattice-matched structure. The quaternary mirrors have poor electrical and thermal conductivities, which can raise the device temperature. However, a double-intracavity-contacted structure along with thick n-type InP cladding layers circumvents these drawbacks and finally leads to an excellent performance. The measured voltage and thermal impedances are much lower for the intracavity-contacted device than an air-post structure in which current is injected through the Sb-based quaternary mirror. The structure utilizes an undercut aperture for current and optical confinement. The aperture reduces scattering loss at the etched mirror and contributes to high differential efficiency and low threshold current density.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IEEE Journal of Selected Topics in Quantum Electronics
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
