Abstract
Clad strip casting was tried using a twin roll caster. The clad strip could be cast directly from melt. The two pieces of strips could be connected easily by very small force, for example, 5N/mm width. Interface between the strips was formed clearly, and two pieces of strips were connected strongly. To cast strongly connected clad strip, connecting surface had to be semi-solid condition. Both of overlay type clad strip and inlay type clad strip could be cast using the twin roll caster in this study. Wire could be inserted easily into the clad strip using this twin roll caster. The clad strip was rapidly solidified like a single strip. Casting conditions which affected the connection of the strips, the interface between the strips and diffusion of the element were investigated in the present study.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.