Abstract
Abstract Previous research has indicated that starch gelatinization during the pelleting process is greater for Enogen® Feed corn compared to conventional yellow dent corn. Increasing starch gelatinization in the pellet increases the starch digestibility in the pig, which potentially leads to increased growth rate. Therefore, the objective of this study was to determine the effects of feeding Enogen Feed corn in meal or pellet form on finishing pig growth performance and carcass characteristics. A total of 288 pigs (53.0 ± 0.5 kg) were used with 8 pigs/pen and 9 pens/treatment in a 72-d study. Treatments were arranged in a 2×2 factorial with main effects of corn source (Enogen Feed corn or conventional yellow dent corn) and diet form (meal or pellet). Main effects of corn source and diet form as well as their interactions were tested. Pelleting parameters were established with a target conditioner temperature of 82.2°C and corn moisture of 13 to 14%. When pelleting the diets, the conditioning temperature for conventional yellow dent corn averaged 68.4°C and Enogen Feed corn averaged 67.7°C. The hot pellet temperature for conventional yellow dent corn averaged 75.1°C and 75.8°C for Enogen feed corn. For overall performance (d 0 to 72), no interactions between corn source and diet form were observed (P > 0.05). There was a tendency (P < 0.10) for slightly improved average daily gain (ADG) and gain:feed ratio (G:F) for pigs fed conventional yellow dent corn compared to those fed Enogen Feed corn. Pigs fed pelleted diets had increased (P < 0.001) ADG, G:F, and hot carcass weight compared to pigs fed meal diets. In summary, feeding pelleted diets to finishing pigs increased ADG and G:F compared to those fed meal-based diets. There were no major differences observed between corn sources or interactions between corn source and diet form on growth performance.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.