12.2: High Performance AMOLED Pixel Circuit Using Interleaved Emit Signals Based on Low‐Temperature Poly‐Si and Oxide (LTPO) TFTs

Abstract

A concise pixel circuit with interleaved Emit signals is proposed for active matrix organic light‐emitting diode (AMOLED) displays, on the basis of low‐temperature polycrystalline silicon oxide (LTPO) TFTs. The oxide TFT can be re‐used for both initialization and threshold voltage extraction periods, using interleaved Emit signals of adjacent lines with overlapped waveforms. The proposed pixel circuit consists of 1 oxide TFT and 5 p‐type LTPS TFTs, while only 2~3 types of line‐by‐line scanning driving signals, i.e. the Emit signal and the Scan signal, are required. Implementation of the proposed pixel circuit shows that the occupation can be reduced to 40 μm × 56.7 μm. Furthermore, optimization of the pixel circuit shows the emission current error is less than 2.3% with threshold voltage variation of ± 0.5 V, while refresh rate from 1 to 120 Hz can achieved.