Abstract
Perovskite-based triboelectric nanogenerators (TENGs) have obtained wide attention and investigation due to their excellent dielectric and electrical properties, as well as the diversity of perovskite materials. In this work, phenethyl ammonium iodide (PEAI) was applied to tailor the interface of MAPbI3 films, to form a 2D/3D heterojunction, and to passivate defects of films. The TENGs after PEAI passivation achieved significant improvement in voltage and current density with an increase in the output voltage from 33.3 to 40.1 V, and the current density was improved from 9.1 to 10.1 mA/m2. The improved output properties might be attributed to changes in the triboelectric charge density, carrier mobility, reduced interfacial combination by effective defect passivation, and favorable charge transporting by constructing 2D/3D heterojunctions for the effect of the built-in electric field. This work demonstrates that interfacial modification is one of the feasible methods for improving the performance of TENGs and supplies further possibilities for high-performance perovskite-based TENGs.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.