10.1063/5.0131308.1

Abstract

This work presents a detailed insight into the flow progression and surface heat transfer distribution across the sharp 180° bend of a two-pass rectangular duct for laminar (Re = 800) and turbulent (Re = 6500) in-flow conditions. Stereoscopic particle image velocimetry (stereo PIV) as well as two-dimensional and two-component PIV measurements and liquid crystal thermography techniques are appropriately used for flow and heat transfer characterization across the complete sharp 180° bend. The centrifugal instabilities arise due to the sharp bend, which induces the secondary flows in the form of counter-rotating vortex pairs commonly known as Dean vortices. These secondary vortices play a significant role in the localized laminar–turbulent transition and turbulence augmentations for laminar and turbulent inflow conditions. Subsequently, quantitative analysis shows that complete 180° turning of flow resulted in intense augmentation of spatially averaged turbulence quantities. Root mean square (RMS) fluctuations in the transverse direction V¯T|rms increase by 298% and 186% for respective flow conditions. Augmentation of ∼ 287% (laminar) and 260% (turbulent) in the wall-normal RMS fluctuations ( V¯N|rms) are observed. These augments in transverse and wall-normal velocity fluctuations result in a very sharp amplification of spatially averaged turbulent kinetic energy ( k¯), that is, 1825% for inlet laminar and 928% for inlet turbulent flow regimes.