Abstract

Today's ultra-wideband optical equipment enables fiber-based data links with up to 1.6 Tbit/s per wavelength at a symbol rate of 128 Gbaud. However, high input signal path losses need to be overcome in commercial products when the digitizers are integrated with the digital signal processor in a deep-submicrometer FinFET-CMOS transceiver application specific integrated circuit (ASIC). This currently limits the analog-to-digital converter (ADC) sampling rate and the detectable link symbol rate to 97 GS/s and 66 Gbaud, respectively. Four of these bandwidth-limited ADCs can be time-interleaved with the presented analog 1-to-4 demultiplexer front end in a SiGe-BiCMOS technology that allows high bandwidths with transistor cutoff frequencies above 300 GHz. The sampling front end effectively divides the necessary ADC bandwidth by the time-interleaving factor, enabling the detection of ultra-high symbol rates of up to 128 Gbaud with only 16-GHz bandwidth requirement for the four ADCs. At these frequencies, subsequent circuits and chip interconnects exhibit significantly lower signal path losses than at 64 GHz-half the symbol rate-and therefore require only a reduced processing power for channel equalization in the analog and digital domain. We demonstrate sampling operation with a large-signal 3-dB bandwidth of 36 GHz and a 6-dB bandwidth of 50 GHz at 128 GS/s in an experimental testbed, as well as the reception of 128-Gbit/s NRZ/OOK and 256-Gbit/s PAM4 signals. The linearity reaches more than 3-bit effective number of bits (ENOB) with a sinusoidal input signal of 500 mV <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">pp</sub> on each of the four output channels. The power consumption is equivalent to a sampling efficiency of 20 pJ/sample, narrowing the gap to slower CMOS solutions and enabling cost-efficient coherent optical links with up to 1 Tbit/s.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.