Abstract
Back reflection losses are a key problem that limits the performances of optical communication systems that work on wavelength division multiplexing (WDM) technology based on silicon (Si) Multimode Interference (MMI) waveguides. In order to overcome this problem, we propose a novel design for a 1 × 4 optical demultiplexer based on the MMI in silicon nitride (SiN) buried waveguide structure that operates at the C-band spectrum. The simulation results show that the proposed device can transmit four channels with a 10 nm spacing between them that work in the C-band with a low power loss range of 1.98–2.35 dB, large bandwidth of 7.68–8.08 nm, and good crosstalk of 20.9–23.6 dB. Thanks to the low refractive index of SiN, a very low back reflection of 40.57 dB is obtained without using a special angled MMI design, which is usually required, using Si MMI technology. Thus, this SiN demultiplexer MMI technology can be used in WDM technique for obtaining a high data bitrate alongside a low back reflection in optical communication systems.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.