Abstract
Zhundong coalfield are huge in China; however, high alkali contents induce severe slagging and fouling problems in boiler. To obtain the characteristics and formation of deposits in boiler burning high alkali coal, the deposits at different positions were sampled in a 350 MW boiler burning Zhundong coal, and analyzed by X-ray Fluorescence. The results indicated that the slagging was deteriorating from bottom to top at water wall. The slag with obvious layer structure only presented at platen superheater. The deposits in horizontal flue were mainly formed from the solidified particles attachment. To further understand the formation mechanism of layer structure in slag at platen superheater, the slag was separated according to the morphology and each layer was analyzed by X-ray Diffraction. The results suggested that through the condensed CaSO4 was the main compounds for the strong thermophoresis in layer 1, the little fused particles with high sodium content played the key bonding role. For layer 2, the fused particles contain high sodium content adhered to deposit surface and formed melt surface, which capture the other particles. The Fe species captured by melt surface lower the melting temperature of the formed deposit, and then aggravated the deposit fusibility in layer 3.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.