Abstract

Permeability has been identified as one of the foremost factors that determine the effectiveness of CO2 sequestration in deep coalbeds. Coal matrix swelling can cause a remarkable decrease in the permeability of a coalbed reservoir during the carbon dioxide injection process. The main aim of this paper is to correlate the diametrical swelling percentage with coal permeability. This experimental program further attempts to investigate the effect of gas flow properties in coal due to CO2 sorption. Furthermore, the applicability of using a laboratory-made reconstituted coal specimen for permeability testing has been comprehensively investigated.A laboratory-based experimental program has been carried out using a high pressure triaxial experimental set-up. In this study, the effect of swelling on coal permeability has been investigated using two types of specimens. An intact brown coal specimen cored from a natural coal block and a reconstituted brown coal specimen made by compacting coal dust in a mould has been subjected to testing. Tests have been carried out under different gas injection and confining pressures. CO2 and N2 gases have been used as injection media. Gas injection has been carried out with two stages of N2 injection, prior to and after CO2 injection.Diametrical swelling of the two specimens has been compared with the permeability data. A good correlation was observed between permeability and coal swelling. The coal swelling percentage increased on exposure to carbon dioxide compared to exposure to N2. This effect increased as gas injection pressure increased. Exposure of the coal specimens to CO2 has contributed to a detrimental effect on permeability. This was clearly evident during the second injection of N2 gas.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.