Abstract

본 논문은 휴대형 비선형 소자 탐지기용 광대역 스파이럴 안테나의 설계를 제안한 것이다. 광대역 안테나의 설계를 위해 방사면 위의 스파이럴 턴 수를 최적화하는 반복 계산이 고려되었다. 원형 편파 설계를 위해 접지면과 방사면 사이의 동일 전류 분포를 유지하기 위해 Archimedean 스파이럴 슬릿을 가진 접지면이 고려되었다. 또한, 고 이득과 고 지향성을 실현하기 위해 캐비티 벽과 금속 캡을 접지면 뒤에 고려하였다. 반사 손실의 측정결과는 관심 대역인 2.4~2.44 GHz, 4.84~4.92 GHz, 7.28~7.36 GHz에서 VSWR 2:1과 잘 일치하였다. 측정된 축비 값은 3 dB 이하로 관측되었고, 모의 실험 결과와도 잘 일치하였다. 관심 대역에서 6.8 dBi 이상의 측정된 이득을 가지는 우수 원형 편파 특성이 관측되었다. This paper proposes the design of broadband spiral antenna for a potable non-linear junction detector (NLJD) system. To realize the broadband antenna design, it was considered optimization of the number of spiral turns by iteration calculation. Ground plane with the Archimedean spiral slit to keep the same current distribution between radiating plane and ground is considered for circular polarization design. In order to realize high directivity and high gain of the proposed antenna, the cavity wall and the metal cap which is located on back of ground plane were also considered in design. Measurement results of return loss were agreed well with VSWR 2:1 at interested frequency band among 2.4 to 2.44 GHz, 4.84 to 4.92 GHz and 7.28 to 7.36 GHz. Measured axial ratio was observed 3 dB below and showed reasonable agreement with simulation results. Characteristics of the RHCP(Right Hand Circular Polarization) with the measured gain of 6.8 dBi above at interested frequency band were also observed.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.