Abstract
램젯 연소실 조건에서 점화보조제가 도포된 Fuel-rich 추진제의 점화 실험을 수행하여 점화 지연과 연소 유지를 확인하였다. 연료 그레인은 HTPB에 AP 파우더 15 wt.%, Al 파우더 5 wt.%가 혼합된 형태로 구성되어 있다. 한편 연료 그레인에 <TEX>$NC/BKNO_3$</TEX>와 Composite 추진제로 이루어진 점화보조제를 도포하여 빠른 점화지연이 나타나도록 하였다. 에탄올 블렌딩 과산화수소 가스발생기를 통해 램젯 연소실의 공기와 가깝도록 온도, 압력, 산소 조성을 조절한 산화제 가스를 유속 <TEX>$200kg/m^2s$</TEX>으로 공급하였다. 실험 결과, 점화보조제가 잘 작동하여 연료그레인에서 0.6초의 점화 지연시간을 파악하였고 연소 중에는 화염이 유지되는 것을 확인하였다. Ignition test of the fuel-rich propellant coated with ignition support material in the ramjet combustor condition was conducted. Ignition delay and flame holding was measured. Fuel grain consist of HTPB mixed with AP particle 15 wt.%, Al particle 5 wt.%. To cause the short ignition delay, ignition support consist of <TEX>$NC/BKNO_3$</TEX> and composite propellant was coated to the fuel grain. Ethanol blended <TEX>$H_2O_2$</TEX> gas generator control the temperature, pressure, <TEX>$O_2$</TEX> concentration in the oxidizer gas in the air. Gas is supplied with mass flux of <TEX>$200kg/m^2s$</TEX>. Through the test ignition support operated well and ignition delay of 0.6 second and the Flame was sustained.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Journal of the Korean Society of Propulsion Engineers
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
