Abstract
The effect of equal-channel angular pressing (ECAP) on the pitting corrosion resistance of anodized Al-Cu alloy was investigated by electrochemical techniques in a solution containing 0.2 mol/L of AlCl3 and also by surface analysis. The time required before initiating pitting corrosion of anodized Al-Cu alloy was longer with ECAP than without, indicating improvement in the pitting corrosion resistance by application of ECAP. Second phase precipitates were present in Al-Cu alloy matrix and the size of these precipitates was greatly decreased by application of ECAP. The precipitates composed of Si and Al-Cu-Si-Fe-Mn were not oxidized during anodization, and the anodic oxide film were absent at the boundary between the normal oxide films and these impurity precipitates. The pitting corrosion of anodized Al-Cu alloy occurred preferentially around these precipitates, the improvement of pitting corrosion resistance of anodized Al-Cu alloy by ECAP appears to be attributable to a decrease in the size of precipitates, which act as origins of pitting corrosion.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
