Abstract
A mathematical model is proposed for the mill arrangement equivalent to semi continuous type in a hot strip mill. The rolling schedule is arranged so that a slab is rolled from 230mm into 60mm in bar thickness by 3 passes roughing with only one reverse mill and 60mm into 1.2mm, 2.0mm, and 2.5mm in final thickness by 7 passes finishing. The possibility of rolling in this case is analytically examined in due consideration of slab weight, temperature change, rolling power, rolling capacity, and rolling speed. As a result, the rolling of the comparably heavy slab with 30t/m in unit weight is enabled, and the temperature condition is sufficiently fulfilled. The length of the rolling mill line can be geometrically shortened very much in comparison with the case of other type hot strip mill.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
