폐기물매립지에 있어서 폐목재의 온실가스 배출계수 평가

Abstract

The IPCC methodology for estimating methane emissions from a solid waste landfill is based on the first order decay (FOD) method. One emission factor in the model is the methane generation potential (L0) that is estimated from the amount of decomposable degradable organic carbon (DOC) in a solid waste landfill. L0 is estimated based on the fraction of DOC in the waste, the fraction of the degradable organic carbon that decomposes under anaerobic conditions (DOCf), methane correction factor (MCF), and the fraction of methane in generated landfill gas (F). The other emission factor is the methane generation rate constant (k). The IPCC recommended that every country needs to develop country-specific key parameters (DOC, DOCf, k) more appropriate for its circumstances and characteristics. The objective of this research was to investigate the greenhouse gas emission factor (k) and parameters (DOC, DOCf) for wood wastes in a solid waste landfill. To investigate DOC, DOCf, and k for wood wastes, the biodegradable rate of wood wastes was determined by comparing the composition of excavated samples (L-1, L-2) with their fresh ones (F-1, F-2). The DOC values were found to be 48.36% and 45.27% for F-1 and F-2, respectively. It showed that the IPCC default value of DOC for wood wastes is appropriate for estimating methane emission. The maximum DOCf (0.17 and 0.18) or each wood waste excavated from G landfill was found to be lower compared with those for IPCC. The IPCC provided that default values of DOCf 0.5. The k values were found to be 0.0055 and 0.0058 year for F-1 and F-2, respectively. The result confirmed that the biodegradation rate of wood wastes was very slow due to its lignin.