Abstract
천공 작업 시 드릴비트 버튼의 타격 속도와 타격 간격은 천공효율을 높이는데 있어 매우 중요한 요소이다. 따라서 본 연구에서는 버튼의 타격 속도 및 간격에 따른 암반 파쇄성능을 분석하기 위하여 홉킨스바 시험기를 이용한 타격시험을 수행하였다. 먼저, 버튼의 타격속도에 따른 암석파쇄 현상을 분석하기 위하여 단일타격 시험을 수행하였고, 수치해석을 통해 단일 타격 시험에 대한 암석의 파쇄과정을 모사하였다. 다음으로 버튼의 타격 간격에 따른 천공효율을 예측하기 위하여 타격 후 설정된 거리만큼 암석 시료를 이동시키고 재차 타격하는 방식으로 다중타격 시험을 수행하였다. 타격시험 후 암석의 천공부피는 레이저 스캐너를 이용하여 측정하였으며, 타격에너지와 천공부피를 통해 천공성능을 계산하였다. 이러한 시험 결과를 바탕으로 직경 102 mm 드릴비트의 1회 타격 시 천공성능을 예측하였다. The percussion rate and spacing of the button of drill bit are very important in maximizing the drilling efficiency. Therefore, a series of percussion tests using Hopkinson bar system was carried out to assess the fragmentation performance against the beat rate and spacing of a drill bit. First, single percussion test complemented with numerical simulation was performed to analyze rock fragmentation phenomenon and to describe the fragmentation process. Next, multiple percussion test that repetitively strike the rock sample moving at predetermined rate was carried out to predict drilling efficiency against the button spacing. After the tests, the fragmented volume of the rock was measured by laser scanner and the drilling performance was analyzed using the calculated percussive energy and measured negative volume. Based on the results, the single impact performance of drill bit with 102 mm diameter was predicted.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
