Abstract

The paper presents pile strip foundations in the areas with karst risk. The analysis of karst hole formation mechanism shows the lateral soil pressure on the piles caused by the downfallen soil on the hole rims, which transfers around the hole edges during karst hole formation. In this case, the horizontal pressure of the pile reactive force in the area of the pile connection with the raft is transferred to the raft. Pile failure at the hole boundaries will lead to the increase of the raft bearing distance above the karst hole. The inadequate raft bearing capacity can provoke the emergency situation. The existing Codes on karst protective foundations design do not contain the analysis of pile and raft horizontal pressure under the downfallen soil.The goal of this work is to develop the method of pile strip foundations analysis in the areas with karst risk in case of karst hole formation. The analysis of stress-strain state of the system “foundation soil — pile foundation” was carried out using numerical modeling in geotechnical program MIDAS GTS. As a result of numerical investigations, the diagrams of lateral soil pressure onto the piles and the raft are plotted. The pile pressure is approximated with the linear or bilinear function in dependence on geometrical dimensions of the karst hole and strength characteristics of soil that generates the horizontal pressure.In the Codes, the analysis of a pile under lateral soil pressure is given for a pile with the free end. In the problem examined, the pile head has the hinged bearing in place of the connection with the raft. In view of the given boundary data, the pile design scheme is plotted. The inner forces and displacements of the pile are determined by integrating the differential equation of a pile bending. The consistent integrations are evaluated out of the boundary conditions. The boundary values of inner forces and displacements are evaluated from the equality conditions of displacements and inner forces in the pile at the level of the hole bottom that are evaluated in turn for the upward and downward pile section. The method of pile analysis is developed in case of lateral soil pressure approximation with the linear function.The method worked out allows recalculating a pile being at the edge of the karst hole and accepting the lateral pressure of the downfallen soil on the hole edges.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call