Abstract
To investigate effects of shear stress and shear strain on the magnetic properties of Sr-ferrite powder, the powder was milled by a mechanofusion (MF) apparatus, and its magnetic characteristics were studied. Coercive force of the MF-milled powder was decreased with milling time, and it reached the constant value of 140 kA⋅m-1 as milling time was longer than 30 min. Reduction of the coercive force of the milled powder was found to slightly improve degree of powder particle alignment under applied magnetic fields. M-type ferrite phase of the original Sr-ferrite powder remains unchanged after the MF-milling treatment. The mean particle size of the powder was increased by a MF-milling treatment longer than 30 min due to aggregation of the powders. As a result, the optimum MF-milling time was in the range from 15 min to 30 min under the experimental conditions of this study.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Journal of the Japan Society of Powder and Powder Metallurgy
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.