Abstract

콘크리트 도로 하부의 이상대를 찾기 위해 전기비저항 탐사를 수행하였다. 콘크리트의 접지저항효과를 줄이기 위해 전기전도성이 좋은 매질과 평판 전극을 이용하였다. 전기비저항 탐사 결과를 분석하고 같은 장소에서 수행한 지하투과레이더 탐사, 충격응답기법, 다중채널 표면파 탐사 결과와 비교하였다. 전기비저항 탐사 결과는 함몰과 포장 구간에서 높은 비저항 분포를 보였으며, 지하투과레이더 탐사 결과는 보강으로 인한 형태를 보였다. 또한 충격응답기법과 전기비저항 탐사 결과의 비교를 통하여 보강 구간에서의 높은 동적강성도가 높은 비저항 분포의 원인임을 확인하였다. 동일한 장소에서 수행한 전기비저항 탐사와 다중채널 표면파 탐사 결과를 공동 크리깅한 결과, 지구통계학적 복합 해석이 각 지구물리 탐사결과에 대한 개별적인 분석보다 더 명확하게 이상대를 확인 할 수 있었다. 이 연구는 지구물리 탐사에 기초한 의사결정 과정에서 지구통계학을 이용한 복합 해석 결과의 활용 가능성을 제시한다. A DC resistivity survey was performed to detect anomalies beneath concrete pavement. A set of high conductive media and planar electrodes were used to lessen the effect's a high contact resistance of concrete. Results of the resistivity survey were analyzed and compared with those of other geophysical surveys such as Ground Penetration Radar (GPR), Impulse Response (IR), and Multi-channel Analysis of Surface Waves (MASW), which were carried out in the same location. The results of resistivity survey showed a high resistive distribution in the section of sink and pavement where a pattern of reinforcement was observed through the GPR survey. Also, a comparison of results between the IR and resistivity surveys indicated that the high resistivity was produced by the high dynamic stiffness in the reinforced section. The co-Kriging of both the results of DC resistivity and MASW surveys at the same location showed that an integrated geostatistical analysis is able to give more accurate description on the anomalous subsurface region than can a separate analysis of each geophysical approach. This study suggests that the integrated geostatistical approaches were used for a decision-making process based on the geophysical surveys.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call