Abstract

ABSTRACT http://dx.doi.org/10.7584/ktappi.2016.48.1.119Journal of Korea TAPPIVol. 48. No. 1, 2016, 119-126pISSN (Print): 0253-3200Printed in Korea • 경북대학교 농업생명과학대학 임산공학과(Dept. of of Wood Science and Technology, College of Agriculture and Life Science, Kyungpook National University, Daegu, 41566, Republic of Korea)† 교신저자(Corresponding Author): E-mail: tjeom@knu.ac.kr In this study, we separated the lignin from the wood by using the high boiling point solvent for developing more environmental friendly pulping method. High boiling point solvents as Ethers, glycols and ketones were used to remove the lignin in the pine wood meals. The Yield and lignin content of residual wood meals was reduced according to the input of the catalyst. Me-C, E-Ca, TEG and MIBK had the best delignification rate of 9 kinds of high-boiling point solvents. At the hydrolysis ratio of the selected solvents, The TEG was highest remain ratio of carbohydrates and the E-Ca was lowest remain ratio of lignin. And the Me-C was most excellent lignin hydrolysis ratio at the low catalyst. The selectivity of delignificationof Me-C, E-Ca, TEG and MIBK solvents were 49.6, 49.9, 53.8 and 53.1%, respectively, and its values were similar to those of the commercial Kraft Pulp.Keywords: High-boiling point solvent, selectivity of delignification, yield, residual lignin, organosolv pulping

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.