Abstract
평판 디스플레이에 사용되는 PET 필름의 광학적 특성을 알아보기 위하여 필름 표면 굴절률, 필름 표면조도 및 필름 내부입자가 광투과율에 미치는 영향을 알아 보았다. 필름표면에 굴절률이 낮은 코팅층을 형성함에 따라 필름의 광투과율이 향상되었고, 최대의 광투과율을 가지는 코팅두께가 있음을 확인하였다. 표면 거칠기의 영향에 대해서는 표면조도를 나타내는 Ra를 입사 파장의 1/4 이하로 조절한 경우 광손실이 발생되지 않았다. 필름 내 무기입자는 입사된 광의 흡수 및 산란을 발생시켜 광손실을 증가시켰다. Poly(ethylene terephthalate) (PET) base films with high light transmittance have been used for the substrate of various functional films in the flat panel display. The effects of the reflective index of coated films, the roughness of the film surface and the content of inorganic silica particles on the light transmittance were studied in this article. Light transmittance was increased by coating a water soluble resin with a low reflective index at an optimum thickness. The roughness of the film did not affect light transmittance when the Ra of the film surface was less than a quarter of the wavelength of incident light. Inorganic silica particles decreased light transmittance due to their absorbance and scattering of the incident light.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
