Выбор геометрических характеристик фронтового устройства и длины камеры сгорания прямоточного типа

Abstract

A method has been developed for selecting the geometric characteristics of the front and the length of the direct-flow combustion chamber. Afterburner combustion chambers are of the ramjet type and are used for a short-term increase in the thrust of a gas turbine engine during takeoff, for overcoming the sound barrier by an aircraft and for flying at supersonic speed, and for making maneuvers. As part of ramjet engines, ramjet combustion chambers are used as the main combustion chambers in which the process of fuel combustion and heat supply to the working fluid is ensured. The developed method for selecting the geometric characteristics consists in optimizing the main operating characteristics of the combustion chamber. Mathematical models are proposed for describing the dependence of the total pressure loss, the combustion efficiency and the range of stable operation of the combustion chamber against the parameters of the flow at the inlet to the combustion chamber and the geometric characteristics of the front device and the length of the combustion chamber. The analysis of the dependences of the combustion chamber working characteristics on the geometric characteristics of the front-line device and its length is carried out. As a result of the analysis of mathematical models, a list of the main geometric characteristics of the front device was determined, on which the total pressure loss, the combustion efficiency and the range of stable operation of the combustion chamber depend. Optimization parameters, optimization criterion and limits for solving the optimization problem are determined. As an implementation of the optimization method, it is proposed to use a diagram of the combustion chamber performance in the coordinates of the optimization parameters. The developed method makes it possible to ensure the optimal basic operating characteristics of the combustion chamber - total pressure loss, combustion efficiency and combustion stability limits.