Abstract
The paper presents the results of a study of the surface and optical properties of the PM-1 polyimide film and the polyimide track membrane. For the study, polyimide (track) nuclear membranes manufactured by ION TRACK TECHNOLOGY FOR INNOVATIVE PRODUCT (it4ip, Belgium)) is used. The pore diameter is 200 nm, the pore density is 5 • 108 cm-1, and the thickness of the polyimide membrane is 25 μm. The data of IR spectroscopy are presented. It is shown that the decrease in the intensity of the peaks of the IR spectra of the membrane compared to the film is a consequence of the oxidative degradation of the polyimide after exposure to heavy ions and chemical etching. The data on the effects of heavy ion irradiation and chemical etching of a polyimide film to obtain a membrane on surface hydrophobicity / hydrophilicity are presented. The optical density of the film and track membranes is determined in the wavelength range of 350-950 nm. The optical density is measured in increments of 50 nm. It is shown that despite the strong difference in the spectral dependence of the optical density of the polyimide film and the track membrane, the optical density of the PM-1 film and the track membrane is quite low in the entire studied wavelength range and does not exceed 0.26 and 0.42, respectively.
Highlights
The paper presents the results of a study of the surface and optical properties of the PM-1 polyimide film and the polyimide track membrane
Polyimide nuclear membranes manufactured by ION TRACK TECHNOLOGY FOR INNOVATIVE PRODUCT) is used
It is shown that the decrease in the intensity of the peaks of the IR spectra of the membrane compared to the film is a consequence of the oxidative degradation of the polyimide after exposure to heavy ions and chemical etching
Summary
Представлены данные влияния облучения тяжелыми ионами и химического травления полиимидной пленки для получения мембраны на гидрофобность/гидрофильность поверхности. Что полиимидные трековые мембраны могут найти применение и в создании полимерных нанокомпозитов, в том числе для радиационно-защитных материалов авиационно-космического назначения [9,10,11]. Данная работа посвящена изучению измене- на структуру и оптические характеристики трения поверхностных, в том числе оптических ковой мембраны проводилась ее сравнительная свойств полиимидной пленки под влиянием об- характеристика с исходной полиимидной пленлучения тяжелыми ионами и последующего хи- кой марки ПМ-1 Для исследования использо- особенностью полиимидной пленки является вали полиимидные (трековые) ядерные мем- способность сохранять механические и электробраны с гидрофильной поверхностью (произво- изоляционные свойства в широком интервале дитель ION TRACK TECHNOLOGY FOR температур (от -250 °C до +350 °C). Основные физико-механические и электрические характеристики полиимидной пленки марки ПМ-1
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Bulletin of Belgorod State Technological University named after. V. G. Shukhov
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.