Θερμομηχανική προσομοίωση των προηγμένων διεργασιών συγκόλλησης με τριβή-ανάμιξη και με ακτίνα λέιζερ

Abstract

The design criteria in modern structures aim to the production of components with reduced weight and low cost, as well as, with higher performance and increased safety. The above goals lead to a tendency of replacing traditional differential structures with more modern integral structure, mainly in aeronautic sector where the weight and cost reduction, without decrease of safety, comprises the main target of the current research effort. The production of integral structures requires the adaptation of existing forming processes as well as the development and optimization of advanced welding processes. The most promising welding processes in aeronautics and maritime industries currently are the Friction Stir Welding–FSW and Laser Beam Welding-LBW. Despite of the many technological advantages of FSW and LBW process, their application in the production of integral structures leads to the development of Residual Stress (RS) and distortion fields which can cause significant problems. Specifically, distortions can effect on the components assembly, while, RS affect the structural integrity. However, an appropriate selection of process parameters can significantly reduce the RS and distortions levels. The usual way to optimize process parameters is experimental trial and error approach; recently, process simulation has been proven efficient, too. The present work aims to the development of efficient methodologies for the thermomechanical simulation of FSW and LBW processes in order to predict temperature history, as wells as RS and distortion fields. Consequently, the RS field is used for the determination of the welding effects on the structural integrity of the welded component. Generally, the reliability of a simulation methodology of any thermo-mechanical process, such as welding, is seriously affected by many parameters; two of them are very base, namely, the accurate determination of the heat input introduced to the material (thermal load) and the accurate representation of thermal and mechanical boundary conditions. As the boundary conditions determined by the welder and it is usually easy to transfer in a numerical model, one of the most difficult simulation issues is the appropriate determination of the heat input which will lead to an accurate prediction of the material temperature history. For this reason, one of the main objectives of the present work is to develop methodologies for the accurate thermal load calculation in both FSW and LBW processes. After the validation of the developed methodologies with respect to experimental measurements, the defined heat sources are used in global thermal models in order to predict the temperature histories which, thereinafter, are introduced in the thermo-mechanical models to predict the developed RS and distortion fields. Finally, the structural integrity of the welded component, under the effect of both RS field and service loading is studied; different possible ‘fracture scenarios’ are investigated based on the Stress Intensity Factor concept and the Elastic Fracture Mechanics principles.