Abstract
Two types of prediction tools for helicopter noise have been developed under the cooperative research between Advanced Technology Institute of Commuter Helicopter Ltd. (ATIC) and National Aerospace Laboratory (NAL) . One of them is a combined method of CAMRAD II, interpolation code for blade motion and wake geometry, aerodynamic code of 3D unsteady Euler solver, and aeroacoustic code based on Ffowcs Williams and Hawkings (FW-H) formulation. The other consists of CAMRAD II, 3D unsteady Euler solver using moving overlapped grid method, and FW-H code. The acoustic waveform of Blade-Vortex Interaction (BVI) noise predicted by the former tool is in good agreement with the experimental data of 1/7-scale model AH-1 Operational Loads Survey (OLS) rotor. This method is applied to investigate the effect of blade-tip shape on the intensity of BVI noise. As a result, it is shown that anhedral and swept-forward tip shapes effectively reduce the BVI noise of OLS rotor in a descent flight condition. The predicted Effective Perceived Noise Level (EPNL) of a helicopter is also compared with the experimental data obtained by ATIC and reasonable correlation is obtained. The latter tool successfully predicts the distinct spikes in the BVI wave-form of ATIC model rotor tested in German-Dutch Wind Tunnel (DNW) . In the comparison of measured and calculated carpet noise contours, reasonable agreement is obtained. The present tools are expected to be useful for the design of low-noise helicopters in the future.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: JOURNAL OF THE MARINE ENGINEERING SOCIETY IN JAPAN
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
