Abstract
ABSTRACT: In this study, a simulation model for a CO 2 heat pump using vapor injection was developed and validated. It was used to predict the improvement of the heating performance of the CO 2 heat pump at various operating conditions. The simulation results showed consistent results with the measured data. The heating performances of the vapor injection and non-injection heat pumps were compared by varying the outdoor temperature and compressor frequency. The heating capacity of the vapor injection heat pump was 40% higher than that of the non-injection heat pump at the outdoor temperature of -8℃. The performance of the vapor injection heat pump was consistently higher than that of the non-injection heat pump even when the compressor frequency was reduced to 35 Hz at the outdoor temperature of -3℃.Keywords: CO 2 heat pump(이산화탄소 열펌프), Vapor injection(가스인젝션), Simulation(시뮬레이션) †Corresponding author Tel.: +82-2-3290-3366; fax: +82-2-921-5439 E-mail address: yongckim@korea.ac.kr 기 호 설 명
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Korean Journal of Air-Conditioning and Refrigeration Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
