Abstract

This review discusses the main methods for producing spherical powder particles of corrosion-resistant steels as a material widely used in all industries. Also the examples of products made by modern additive methods are described. Currently, spherical powder particles of corrosion-resistant steels are used in the following additive methods: selective laser melting, selective laser sintering, direct laser sintering, and electron beam melting. Each of these methods has its own requirements for the characteristics of spherical powder particles of corrosion-resistant steels. The review provides a brief description of the principles of operation of each method and the requirements for spherical powder particles of corrosion-resistant steels. It also considers a detailed description of each method of additive manufacturing with a description of the principle of operation and specific examples of obtaining spherical particles of corrosion-resistant steel powders with indication of their properties (morphology, structural features, chemical composition, fluidity, bulk density). A comparative analysis was carried out with a description of disadvantages and advantages of each method. Examples of the use of spherical particles of corrosion-resistant steel powders for the manufacture of products by various additive methods (including post-processing) are given with description of the final products characteristics. Based on the data presented, a conclusion was made about the preferred methods for obtaining spherical particles of corrosion-resistant steel powders for specific additive methods used in modern industry. The review considers the following methods for producing spherical powder particles: water atomization (atomization of liquid metal with a jet of water under pressure); gas atomization (atomization of the melt with a jet of inert gas (argon or nitrogen) under pressure); centrifugal atomization (atomization of molten metal with a high-speed rotating disc); ultrasonic atomization (atomization of liquid metal by ultrasound); non-contact atomization (atomization of liquid metal with a powerful pulse of electric current); plasma wire spraying; plasma spraying of a rotating electrode; plasma spheroidization.

Highlights

  • Producing spherical powder particles: water atomization; gas atomization (atomization of the melt with a jet of inert gas under pressure); centrifugal atomization; ultrasonic atomization; non-contact atomization; plasma wire spraying; plasma spraying of a rotating electrode; plasma spheroidization

  • ‒ подготовка текста главы «Методы получения сферических порошков для аддитивного производства»

Read more

Summary

Коррозионностойкие стали в аддитивном производстве

В данном обзоре рассмотрены основные методы получения сферических частиц порошка коррозионностойких сталей как материала, широко применяемого во всех отраслях промышленности. В обзоре приведено краткое описание принципов работы каждого метода и требования, которые предъявляются к сферическим частицам порошка коррозионностойких сталей. Дано подробное описание каждого метода аддитивного производства с описанием принципа работы и конкретными примерами получения сферических частиц порошков коррозионностойких сталей с указанием их свойств (морфология, структурные особенности, химический состав, текучесть, насыпная плотность). В конце обзора приведены примеры использования сферических частиц порошков коррозионностойких сталей для изготовления изделий различными аддитивными методами (включая постобработку) с описанием характеристик конечных изделий. На основе приведенных данных сделан вывод о предпочтительных методах получения сферических частиц порошков коррозионностойких сталей для конкретных аддитивных методов, используемых в современной промышленности. Ключевые слова: аддитивное производство, сферический порошок, порошковая металлургия, коррозионностойкие стали, свойства порошков, требования к сферическим частицам, свойства напечатанных изделий, сравнительный анализ.

Методы получения сферических порошков для аддитивного производства
Fe Основа Основа Основа
Ni Mn
Аддитивные методы получения деталей
Процессы аддитивного производства
Материалы для аддитивных методов
Постобработка Литературные источники
Модуль Юнга
Список литературы References
Сведения об авторах Information about the authors
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call