Abstract
프로그레시브금형에 있어서 스트립 레이아웃석계는 제품 양산을 결정하는 중요 요인이다. 본 논문에서는 자동차에 사용되는 브라켓의 스트립 레이아웃설계를 하였다. 3D모델링이 아닌 자동화 모듈인 씨마트론 다이 디자인을 활용하여 3D로 스트립 레이아웃설계를 하였다. 광폭 2열 2개 뽑기의 내측캐리어를 단 배열로 블랭크 레이아웃을 최적화하였다. 사용된 3D CAD/CAM 소프트웨어는 Cimatron Die Design이며 10개 공정으로 스트립 레이아웃설계를 완성하였다. Strip layout design in progressive die is an important factor that determines the applicability of mass production. In this study, the layout design of bracket strips used fer automobiles was executed. The strip layout design was made in 3D with the use of Cimatron die design, an automation module rather than a 3D modeling module. Blank layout has been optimized through a layer arrangement of the wide run positioning inside carrier (double-row and two-pass type). The 3D CAD/CAM software used was Cimatron Die Design; the strip layout design was completed in ten processes.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Journal of the Korea Academia-Industrial cooperation Society
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
