Abstract
The influence of gantry inclination on image quality was examined in the Y and Z directions and an increase in the volume of a scan part. FWHM (full width at half maximum) in the Y direction decreased at the rate of 2.53%, which was caused by leaving the center of the gantry, and spatial resolution was improved. FWHM (y) in the Z direction increased at a rate of y=2.4x (1/costheta)+0.91 which was caused by an increase in the gantry angle of inclination, and spatial resolution was declined. The relation between FWHM (y) and pitch (x) was y=0.19x+3.12. The increase in FWHM caused by the increase in the gantry angle of inclination was revised with pitch from two formulae, and it became constant. Noise was corrected in the same way, and it became constant. The increase in the noise that occurs due to the increase in the volume of the body caused by the gantry tilt angle was corrected with the tube current, and applied to AEC (automatic exposure control). The influence of gantry inclination on image quality was adjusted, and image quality was improved.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
