Упругие характеристики подрельсового основания безбалластного железнодорожного пути

Abstract

Objective: Experimental determination track modulus and the coeffi cient of relative stiffness of underrail base and the rail, which are the main elastic characteristics that determine the stresses in the structural elements of track superstructure under the impact force from the train. The values of these parameters for a track with a ballast layer are well studied, in contrast to a ballastless track. Comparison of the elastic characteristics of a ballastless railway track with analogs of a track on ballast, as well as an assessment of their effect on the stress-strain state of the superstructure elements of a ballastless track. Methods: When carrying out full-scale tests, strain-gauge methods for measuring stresses in the elements of the track superstructure were used. The obtained values were processed by the methods of mathematical statistics. One statistical series included the values of stresses corresponding to one type of rolling stock, fi xed axle load and train speed, changing by no more than 10 km/h. The probability level in processing the results was taken in all cases equal to 0,994. Results: The values of track modulus and the coeffi cient of the relative stiffness of the underrail base and the rail were obtained for a ballastless structure of the RHEDA 2000 type. Practical importance: The results allow us to consider the rail as a beam lying on a solid elastic foundation in relation to the ballastless track and use the existing calculation methods for the design of ballastless track structures depending on the operating conditions.