Abstract
Lobe pumps do not damage the structure of a highly viscous substance. Therefore, the lobe pumps are increasingly used for pumping the liquid food products, despite the high cost. For selecting the rotary lobe pumps, the dependences of the productivity on the pressure drop are necessary. Some manufacturers of the lobe pumps post online the dependences of these characteristics on the rotor speed. There is considered a method developed for calculating the performance diagrams of lobe pumps (Q–P) subject to the influence of the viscosity of pumped liquid food products based on the results of the tests. For example, the characteristics of WEB RF-024, Pomac PLP 1-1.5 when pumping fish oil are considered. The analysis of the test results showed the need to take into account in the calculations the minimum speed 
 of rotation of the rotor n0, at which pumping of the liquid begins. It is stated that the minimum rotational speed n0 is 
 a nonlinear function of pressure drop. The volume of liquid pumped in one revolution does not depend on the pressure drop. The volume of liquid with high viscosity pumped in one revolution does not depend on the pressure drop. An in-crease in the temperature of fish oil leads to a decrease in the performance of the lobe pump.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Vestnik of Astrakhan State Technical University. Series: Fishing industry
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
