ДИФФЕРЕНЦИАЛЬНЫЕ УРАВНЕНИЯ РАВНОВЕСИЯ СПЛОШНОЙ СРЕДЫ ДЛЯ ПЛОСКОЙ ДЕФОРМАЦИИ В ЦИЛИНДРИЧЕСКИХ КООРДИНАТАХ ПРИ БИЛИНЕЙНОЙ АППРОКСИМАЦИИ ЗАМЫКАЮЩИХ УРАВНЕНИЙ

Abstract

Problems of the formulation of differential equations of equilibrium in terms of displacements for a plane strain of continuous media at bilinear approximation of closing equations are considered leaving out of account geometric nonlinearity in the cylindrical coordinate system. Based on the assumption that the curves of volumetric and shear strain are independent from each other, six main cases of physical dependencies are considered, which are the functions of the relative position of break points on the bilinear curves of the volumetric and shear strain. Obtaining of bilinear physical dependencies is based on the calculation of secant moduli of the volumetric and shear strain. On the first line of the curves, secant moduli are constant for both volumetric and shear strain, while on the second line, the secant modulus of the volumetric strain is a function of the volumetric strain, and the secant modulus of the shear strain is a function of the shear strain intensity. Putting the corresponding bilinear physical equations into differential equations of continuum equilibrium, which disregard geometrical nonlinearity, the resulting differential equations of equilibrium are obtained in terms of displacements for a one-dimensional plane strain of continuum in the cylindrical coordinate system. These equations can be used when determining stress-strain state of continuous media under one-dimensional plane strains with no regard for geometrical nonlinearity, and whose physical relations are approximated by bilinear functions.