Abstract

토질분류법에서 흙은 크게 사질토와 점성토로 분류되며, 실제 설계에서도 이와 같이 분류된 흙 종류에 따라 다른 예측식을 사용하여 흙의 거동을 평가하고 있다. 그러나, 모래-세립분 혼합토는 전형적으로 중간토(intermediate soil or transitional soil)로 구분되어 모래와 점토의 중간적인 성질을 나타내기 때문에, 이러한 혼합토에 대한 거동특성을 평가할 수 있는 기준이 필요하다. 본 논문에서는 입도분포를 조정한 특정 모래에 세 가지 종류의 세립분으로 구성된 다양한 세립분함유율을 갖는 시료를 대상으로 일련의 반복 삼축압축시험을 수행하였다. 모래가 골격을 이루는 간극비(골격간극비)를 고려하여, Silica sand와 세립분(Iwakuni natural clay, Tottori silt, kaolinite)을 다양한 건조 중량비로 혼합하여 그 특성을 파악하였으며, 실험결과로 전환 세립분함유율(threshold fines content)을 넘지 않는 혼합토의 반복전단강도를 세립분 함유율 증가에 따라 평가하였다. 그 결과, 반복 전단응력비는 세립분 함유율 증가에 따라 조밀한 시료에서는 감소, 느슨한 시료에서는 증가하는 결과를 나타냈으며, 혼합토의 반복전단응력비를 등가골격간극비의 개념을 이용하여 평가했다. In most design codes, soils are classified as either sandy or clayey soils, and appropriate design equations for each soil type are used to estimate their soil behaviour. However, sand-fine mixtures, which are typically referred to as intermediate soils, are somewhere at the middle of sandy or clayey soils, and therefore a unified interpretation of soil behaviour is necessary. In this paper, a series of cyclic shear tests were carried out for three different combinations of sand-fine mixtures with various fines content. Silica-sand mixture and fines (Iwakuni natural clay, Tottori silt, kaolinite) were mixed together with various mass ratios, while paying attention to the changes of void ratios expressed in terms of sand structure. The cyclic shear strengths of the mixtures below the threshold fines content were examined with the increasing fines contents. As a result, as the fines contents increased, their cyclic deviator stress ratios decreased for dense samples while it increased for loose samples. Additionally, cyclic deviator stress ratio of the mixtures was estimated using the concept of equivalent granular void ratio.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call