Abstract
The main parameters of the p-i-n photodiodes (PD) are responsivity, dark current and capacity of responsive elements (RE). To ensure the maximum values of the specified parameters, it is necessary to use defect-free silicon with the maximum values of resistivity and life time of minor charge carriers. These characteristics of the starting material degrade during high-temperature thermal operations. Therefore, it is worth using a technology that allows you to avoid the degradation of silicon characteristics. This can be implemented by reducing the temperature of diffusion and oxidation operations, as well as by reducing the number of actual thermal operations. The samples were made according to two versions of the technology: diffusion-planar using two-stage diffusion of phosphorus from planar sources, and mesotechnology using one-stage diffusion of phosphorus using liquid PCl3 diffusant. After manufacturing, the PD parameters were compared. The use of mesotechnology with one-stage diffusion of phosphorus made it possible to reduce the number of thermal operations by two times compared to serial technology. The experimental samples had a pulse responsivity at a wavelength of 1.064 μm of 0.47-0.50 A/W, and the serial ones had a responsivity of 0.45-0.48 A/W. The difference in responsivity is caused by the difference in the life time of minor charge carriers, since in the case of the proposed technology, the degree of degradation of the life time of minor charge carriers during the manufacturing process is smaller. After selective etching, it was seen that when using a liquid diffusant, the density of dislocations on the crystal surface is much higher than when using planar sources of phosphorus. Due to the higher density of dislocations, the experimental samples had higher dark currents, but when using a low bias voltage, the difference in dark currents is insignificant. The RE capacity of the experimental samples was slightly lower than that of the serial ones. This can be explained by the difference in the resistivity of the i-region of the final crystals.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Security of Infocommunication Systems and Internet of Things
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.