Abstract
본 논문에서는 현재 양산되고 있는 Red(621 nm), Green(530 nm), Blue(453 nm), Amber(590 nm) 등 4파장의 LED 조합을 이용하여 색온도가 가변되는 동안에도 평균연색지수 및 특별연색지수 R9 값이 높게 유지될 수 있도록 조명의 스펙트럼을 최적화하였다. 최적화 시 설계의 정확도를 높이기 위하여 실제 측정한 LED 스펙트럼을 사용하였고 광선과 기구물 사이의 상호 작용을 고려한 광선 추적 기법을 활용하여 수행하였다 또한 최적화 결과를 검증하기 위하여 색온도 가변 조명 장치를 직접 제작하였으며 광 특성을 평가한 결과 색온도가 3000 K에서 6000 K까지 변하는 동안 CRI 및 R9 값이 각각 87~90, 34~93을 나타내었다. In this paper the spectra of correlated color temperature (CCT) tunable white light-emitting diode (LED) luminaires, consisting of commercial red, green, blue, and amber LED chips, were optimized to increase color rendering index (CRI), and a special CRI of R9 for deep red color was obtained. To improve the design's accuracy, measured LED spectra were used instead of mathematically modeled ones. Real CCT tunable LED luminaires with CRIs of 87-90 and R9s of 34-93 were fabricated and demonstrated at CCTs of 3000-6000 K.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.