Abstract
The surface properties of microporous aluminosilicates are of primary importance in chemical technology and catalysis. The determination of the surface area, pore volume, and pore size and size distribution for microporous aluminosilicates is a complex scientific and technical problem related to both accurate measurements and the correct choice of a mathematical model that adequately describes the physicochemical processes occurring on the test surface. Currently, t-plot, as-plot, Dubinin-Radushkevich model, Dillimore model and Horvath-Kawazoe model are frequently used, each of which has certain advantages and certain disadvantages, to determine micropores in the material. It should be noted that t-plot model found the most frequent use. This is a consequence of the good correlation of volumes and pore areas obtained with its help with theoretically calculated values for various materials. In this point, the article provides a calculation of Zn-modified zeolite H-ZSM-5 surface properties using the t-plot model, for which nitrogen adsorption isotherms were originally obtained. The nitrogen adsorption isotherms of the initial zeolite H-ZSM-5 can be attributed to the first type of isotherms, and the modified samples to the fourth type of isotherms according to Brunauer’s classification. It was found that the initial zeolite is a typical microporous zeolite of H-ZSM-5 type, while the modified samples are micro- and mesoporous materials. Calculation of nitrogen adsorption isotherms using the t-plot model allows to determine the volume of micro and mesopores, which varied in the range of 0.11–0.14 cm3/g for micropores and 0.04–0.07 cm3/g for mesopores. Based on the obtained data, it can be concluded that when zeolite is modified with zinc at a zinc concentration less than 15 wt.%, micropores are not filled with zinc, while mesopores are predominantly filled and an additional surface of zinc oxide is formed on the external surface of the zeolite.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
