Abstract
GPS/INS 항법시스템의 설치에 있어서 대다수의 경우 GPS 수신기 안테나는 차량의 외부에 설치하게 되고 IMU는 내부에 설치하게 된다. Lever Arm 오차는 이와 같이 센서의 장착 위치 차이로 인하여 발생하는 구조적인 오차에 해당한다. Lever Arm 오차는 항법성능에 직접적으로 영향을 주기 때문에 적절한 보상이 반드시 필요하다. 본 논문에서는 GPS와 INS의 속도 측정치를 활용하여 임의의 위치에 장착된 두 센서의 Lever Arm 오차를 효과적으로 추정하고 보상하는 방식을 제안하였다. 실험을 통해 제안한 알고리즘의 타당성을 검증하였으며, 항체의 회전운동 구간에서 Lever Arm 오차 보상이 특히 중요함을 보였다. In GPS(Global Positioning System)/INS(Inertial Navigation System) integrated navigation systems, GPS antennas and an inertial measurement units are usually installed outside and inside of the vehicle, respectively. By the difference of installed locations, performance of GPS/INS integrated navigation systems is affected by lever arm errors. For more accurate navigation, lever arm errors need to be compensated correctly since it directly affects the accuracy of navigation states. This paper proposes an effective lever arm error compensation method that utilizes velocity measurements of GPS and INS. By an experiment, feasibility of the proposed algorithm is verified. It is also shown that lever arm compensation is especially important when vehicles are experiencing rotational movements.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Journal of the Korean Society for Aeronautical & Space Sciences
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.