Abstract
In the current conditions, there is a multifaceted urgent problem of meeting the growing demand of agriculture for modern and high-quality equipment. Mulchers for tractors, excavators and skid steer loaders are becoming more and more popular as a type of attachment. Carbide cutting elements for the mulcher have a high resource, do not require sharpening, and are not afraid of small stones in the soil. An urgent task in terms of import substitution is the organization of their production at domestic engineering enterprises, which requires information on the materials used for manufacturing. The purpose of the study is to study the details of working bodies for foreign-made mulchers and to identify domestic analogues for the organization of industrial production in the Russian Federation. Hardness of foreign-made mulcher base is 431…710 HRC; cleaner - 221; carbide plate - 1068 ... 1073; carbide crown - 1062 ... 1076, tool holder - 51 HRC. For the production of working bodies of mulchers, Russian analogues of structural materials can be used. The tool holder and base can be made of steel for castings of ordinary grades 40KhL or 35GL GOST 977-88. For the manufacture of a scraper, chromium steel grade 40X or manganese steel grade 35GL is suitable. Parts should be subjected to a heat treatment consisting of quenching and low stress relief tempering. For the manufacture of hard-alloy elements of cutters, it is advisable to use tungsten sintered alloys of grades VK8 or VK10. Hard alloy elements should be soldered with solder grades LNMts 49-9-0.2, MNMts 55-6-4 or MNMts 9-23.5, which provide high strength of steel-hard alloy joints of 350 ... 450 MPa. It is advisable to weld the scraper to the base as follows. First, the root welds are welded with Sv-08G2S solid section welding wire by semi-automatic gas welding. Then the welded joint is surface hardened with Kiswel K-700HT or WELTEK-H565 flux-cored wire by semi-automatic gas welding. This technology provides a weld with a hardness of 54…60 HRC.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
