Abstract

The article discusses the possibility of reducing the atmospheric environmental load of highways by applying compositions with photocatalytic properties to acoustic screens. It is found that the amount of nitrogen oxides on the territory of the city of Moscow exceeds the MPC norms. Therefore, a potential way to reduce the level of the average daily and maximum one-time MPC of nitrogen oxides is proposed, when using coatings of traditional acoustic screens with photocatalytic compositions. Titanium dioxide in anatase form is considered as a photocatalytic agent. To reduce the density and increase the porosity of cement compositions, a cellulosic suspension obtained by saturation in an aqueous medium with subsequent homogenization is introduced. The effect of cellulose in the considered cement systems in combination with a photocatalytic agent has been investigated. By the method of mathematical planning, a two-factor compositional experiment is compiled. In result, the degrees of influence of titanium dioxide and cellulose additives on the strength, density and water absorption of the composites under study are established. The study of the structure of the obtained composites shows that TiO2 is mainly located on the surface of cellulose fibers, which theoretically increases the useful surface for photocatalytic reactions and, as a consequence, the final efficiency of the compositions.

Highlights

  • ПРИМЕНЕНИЕ ФОТОКАТАЛИТИЧЕСКИХ БЕТОНОВ В ДОРОЖНОМ СТРОИТЕЛЬСТВЕДля изучения влияследований рассматриваются только железобе- ния количества добавок в цементной композиции тонные акустические экраны, так как их поверх- на свойства фотокаталитических составов исностная обработка является наиболее рациональ- пользовался портландцемент марки ЦЕМ I ной за счет родства структур «бетон - цементная 32,5Н

  • The article discusses the possibility of reducing the atmospheric environmental load of highways by applying compositions with photocatalytic properties to acoustic screens

  • The study of the structure of the obtained composites shows that TiO2 is mainly located on the surface of cellulose fibers, which theoretically increases the useful surface for photocatalytic reactions and, as a consequence, the final efficiency of the compositions

Read more

Summary

ПРИМЕНЕНИЕ ФОТОКАТАЛИТИЧЕСКИХ БЕТОНОВ В ДОРОЖНОМ СТРОИТЕЛЬСТВЕ

Для изучения влияследований рассматриваются только железобе- ния количества добавок в цементной композиции тонные акустические экраны, так как их поверх- на свойства фотокаталитических составов исностная обработка является наиболее рациональ- пользовался портландцемент марки ЦЕМ I ной за счет родства структур «бетон - цементная 32,5Н. Целью данного ис- следуемой фотокаталитической добавки показал следования является разработка и исследования наличие кристаллов TiO2 с тетрагональной синцементных составов для акустических экранов гонией в виде анатазной модификации – 98,3 % и автомобильных дорог с комплексным примене- рутильной – 1,7 %. Производители TiO2 снижают его фотоактивность за счет обработки SiO2 и Al2O3, которые в дальнейшем могут смываться с поверхности зерен диоксида титана при механическом воздействии в водной среде. В связи, с чем для повышения площади поверхности реакции фотокатализа вводили целлюлозную суспензию, полученную методом механической гомогенизации вторичной целлюлозы в водной среде. Изменение средней плотности и величины ристости от состава полученных композитов водопоглощения косвенно характеризуют пара- фиксировались показатели плотности и водопометры пористости полученных композитов, что в глощение

Выходные параметры
БИБЛИОГРАФИЧЕСКИЙ СПИСОК
Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.